Publications

This page has a list of AME’s most recent publications

BOOKS

  1. N. Ota and P.K. Wright, “Residential Energy Management for a Carbon-Constrained World,” Published by VDM Verlag in 2008, ISBN 978-3-639-02050-2.
  2. E. Reilly and P.K. Wright, “Modeling and Fabrication of a Thin Film Piezoelectric Energy Scavenging Device”, Published by VDM Verlag in 2008, ISBN 978-3-639-01152-4.
  3. S. Roundy, P.K. Wright and J. Rabaey, Energy Scavenging for Wireless Sensor Networks with Special Focus on Vibrations, Kluwer Academic Publishers, published in 2004, 1- 212 pages, ISBN Number 1-4020-7663-0.
  4. C. Wilson and P.K. Wright, “Safety, Rescue, and Emergency Response in a Post 9/11 World: Design and Experiment of Head-mounted Displays and New Technologies for Urban/Industrial Firefighting and Emergency First Response”, Published by VDM Verlag in 2008, ISBN 978-3-639-00474-8.
  5. K. Wright, 21st Century Manufacturing, Prentice Hall, Upper Saddle River, NJ. Published August 2001, 1-510 pages. ISBN Number 0-13-095601-5.
    Also printed in Chinese – ISBN Number 986-412-004-2 — Chinese Translation of 21st Century Manufacturing, translated by J. Feng. Chinese translation also published by Tsinghua University Press (TUP) in Beijing.
  6. M. Trent and P.K.Wright, Metal Cutting, 4th Edition, Butterworth Heinemann, Newton MA, published January 2000, 1- 446 pages. ISBN Number 0-7506-7069-X.
  7. K. Wright and D.A. Bourne, Manufacturing Intelligence, Addison-Wesley, Reading, MA. July 1988, 1-352 pages. ISBN Number 0-201-13576-0

REFEREED PUBLICATIONS

ARCHIVAL JOURNALS

  1. Son D. Nguyen, Igor Paprotny, Paul K. Wright and Richard M. White, “MEMS Capacitive Flow Sensor for Natural Gas Pipelines,” Sensors and Actuators Physics A, Accepted and in press.
  2. Qiliang Xu, Lu Li, Igor Paprotny, Richard M. White, Albert Fannjiang, and Paul K. Wright, “Reconstruction of Electric Currents from Distributed Magnetic Field Measurements: Theory and Applications,” Journal of IEEE Transaction on Signal Processing, In review.
  3. Keist, C. Orme, P.K. Wright and J.W. Evans, “An in situ AFM Study of the Evolution of Surface Roughness for Zinc Electrodeposition within an Imidazolium Based Ionic Liquid Electrolyte,” Electrochimica Acta – Accepted and in press.
  4. Wang, R. Winslow, D. Madan, J.W. Evans, and P.K. Wright, “Development of MnO2 Cathode Inks for Flexographically Printed Rechargeable Zinc-based Battery,” Journal of Power Sources, accepted for publication June 13th 2014.
  5. Paprotny, I., C.G. Levey, P.K. Wright, and B.R. Donald, “Turning-rate Selective Control: A New Method for Independent Control of Stress-engineered MEMS Microrobots.” Robotics: Science and Systems VIII, Newman, N. Roy, S. Shrinivasa (Eds.), 2014, pp. 321 – 328.
  6. K. Wright, “Cyber-physical Product Manufacturing,” Society of Manufacturing Engineers – Manufacturing Letters, 2014, Volume 2, (2), pp. 49 – 53.
  7. Madan, Z. Wang, A. Chen, R. Winslow, P. K. Wright, J. W. Evans, “Dispenser Printed Circular Thermoelectric Devices using Bi and Bi0.5 Sb1.5 Te3,” Applied Physics Letters Volume 104, pp. 013902. (2014).
  8. L. Burghardt, A.C. Waterbury, I. Paprotny, L.M. Miller, P. Minor, R. Send, Q. Xu, R.M. White, and P.K. Wright, “A Design Methodology for Energy Harvesting: With a Case Study on the Structured Development of a System to Power a Condition Monitoring Unit,” Energy Harvesting and Systems, 2014, Vol. 1 (1/2), pp. 101 – 112.
  9. Hartmann and P.K. Wright, “Designing Bespoke Interactive Devices,” Computer – IEEE Computer Society, August 2013, Vol.46, (8), pp. 85 – 89.
  10. K. Wright, “Manufacturing Metropolises: design, fabrication and service” in “21st Century Manufacturing”, United Nations Industrial Development Organization (UNIDO), 2013, pp. 67 – 85.
  11. Madan, Z. Wang, A. Chen, P. K. Wright and J, W. Evans, “High Performance Dispenser Printed MA p-type Bi0.5 Sb0.5 Te3 Flexible Thermoelectric Generators for Powering Wireless Sensor Networks,” ACS Applied Materials and Interfaces Volume 5, 11872-11876 (2013).
  12. Xu, I. Paprotny, M. Seidel, R.M. White and P.K. Wright, “Stick-on Piezoelectromagnetic Current Sensing AC Current Monitoring of Circuit Breaker Panels,” IEEE Sensors Journal, March 2013, Volume 13, No. 3, pp. 1055 – 1064
  13. Paprotny, Q. Xu, W.W. Chan, R.M. White and P.K. Wright, “Electromechanical Energy Harvesting from Current-Carrying Conductors,” IEEE Sensors Journal, January 2013, Volume 13, No. 1, pp.190 – 201.
  14. M. Miller, P. Pillatsch, E. Halvorsen, P.K. Wright, E.M. Yeatman, and A.S. Holmes, “Experimental passive self-tuning behavior of a beam resonator with sliding proof mass,” Journal of Sound and Vibration, December 2013, Volume 332, No. 26, pp. 7142 – 7152.
  15. Winslow, C.H. Wu, Z. Wang, B. Kim, M. Keif, J.W Evans, and P.K. Wright, “Development and manufacture of printable next-generation gel polymer ionic liquid electrolyte for Zn/MnO2batteries,” Journal of Physics, 2013, Volume 476, 1, pp. 012085 – 012090.
  16. Xu, Q., Seidel, M., Paprotny, I., R. M. White, and P. K. Wright, “Stick-on Piezoelectromagnetic AC current monitoring of circuit breaker panels,” IEEE Sensors Journal, March 2013, Volume 13, (3), pp.1055-1064.
  17. Waterbury, A.C., and Wright. P.K., “Vibration energy harvesting to power condition monitoring sensors for industrial and manufacturing equipment,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, June 2013. Volume 227(6): pp.1187-1202 (This paper won the SAGE Best Paper Prize in 2013 from the editorial board of the Journal of Mechanical Engineering Science).
  18. Deepa Madan, Zuoqian Wang, Alic Chen, Rei-cheng Juang, Paul K. Wright, James W. Evans, “Enhanced Performance of Dispenser Printed MA n-type Bi2Te3 Composite Thermoelectric Generators,” ACS Applied Materials and Interfaces, 2012, Volume 4, pp. 6117-6124.
  19. A. Weinstein, M. R. Cacan, P. M. So and P. K. Wright, “Vortex shedding induced energy harvesting from piezoelectric materials in heating, ventilation and air conditioning flows,” IOP Journal of Smart Materials and Structures, 2012, Volume 21, pp. 045003 – 045013.
  20. Chen and P.K. Wright, “Medical Applications of Thermoelectrics” in Modules Systems and Applications in Thermoelectrics, 2012, Ch. 26, Edited by D.M. Rowe, ISBN: 978-1-4398-7472-1, (Boca Raton, CRC Press).
  21. Wang, A. Chen, R. Winslow, D. Madan, R.C. Juang, M. Nill, J.W. Evans, and P.K. Wright, “Integration of dispenser-printed ultra-low-voltage thermoelectric and energy storage devices,” Journal of Micromechanics and Microengineering, 2012, Volume 22 (9), pp. 094001 – 094008 (The Journal chose to publish our device on the cover of Vol. 22).
  22. K. Wright, D.A. Dornfeld, Z. Wang, A. Chen, R.C. Juang, J.W. Evans, “Printed Energy Storage: From Prototype to Large-scale Manufacturing,” Transactions of North American Manufacturing Research Institution of the SME, Volume 40, 2012, Notre Dame, IN. pp. 681-688.
  23. Madan, A. Chen, R.C Juang, P.K. Wright, and J.W. Evans, “Printed Se-Doped MA n-type Bi2Te3 Thick-film Thermoelectric Generators,” Journal of Electronic Materials, 2012, Volume 41, Number 6, pp. 1481 – 1486.
  24. M. Miller, P. D. Mitcheson, E. Halvorsen and P.K.Wright, “Coulomb-damped resonant generators using piezoelectric transduction,” Applied Physics Letters, 2012, Volume 100, pp. 233901-233905.
  25. Wang, P. Marcolongo, J.A. Lemberg, B. Panganiban, J.W. Evans, R.O. Ritchie, P.K. Wright, “Mechanical Fatigue as a Mechanism of Water Tree Propagation in TR-XLPE,” IEEE DEIS Volume 19, 2012, pp. 321-330
  26. Kong, S. Choi, Y. Yasui, S. Pavanaskar, D. Dornfeld, P. Wright, “Software-based tool path evaluation for environmental sustainability,” Journal of Manufacturing Systems, 2011, Volume 30, (4) pp. 241 – 247.
  27. Wang, J.W. Evans and P.K. Wright, “Thermodynamics of Water Treeing,” IEEE Transactions on Dielectrics and Electrical Insulation, 2011, Volume 18, pp. 840-846.
  28. M. Miller, E. Halvorsen, T. Dong and P.K. Wright, “Modeling and experimental verification of low-frequency MEMS energy harvesting from ambient vibrations,” Journal of Micromechanics and Microengineering, 2011, Volume 21, (4), pp. 045029–045041.
  29. Reilly, F. Burghardt, R. Fain and P.K. Wright, “Powering a wireless sensor node with vibration-driven piezoelectric energy harvester,” Journal of Smart Materials and Structures, December 2011, Volume 20, pp. 125006 – 125014, doi: 10.1088/0964-1726/20/12/125006
  30. Chen, D. Madan, P.K. Wright, and J.W. Evans, “Dispenser-printed planar thick-film thermoelectric energy generators,” Journal of Micromechanics and Microengineering, Sept. 2011, Volume 21 (10), pp. 104006-104014
  31. T-T. Yen, T. Hirasawa, P.K.Wright, A.P. Pisano and L. Lin, “Corrugated aluminum nitride energy harvesters for high energy conversion effectiveness,” Journal of Micromechanics and Microengineering, July 2011, Volume 21, pp. 085037-085046.
  32. Maden, A.Chen, P.K. Wright and J.W. Evans, “Dispenser printed composite thermoelectric thick films for thermoelectric generator applications,” Journal of Applied Physics, 2011 (February), Volume 109, pp. 034904-1 to 034904-6.
  33. Ho, J.W. Evans, and P.K. Wright “Energy Storage”, in S. Beeby, N. White, eds. Energy Harvesting for Autonomous Systems, 2010, Norwood MA, Artech House Publisher, Ch. 7, pp. 211 – 247
  34. C. Ho, J.W. Evans and P.K. Wright, “Direct Write Dispenser Printing of a Zinc Microbattery with an ionic liquid gel electrolyte,” Journal of Micromechanics and Microengineering, October 2010, Volume 20, pp. 104009-104017.
  35. K. Wright, D.A. Dornfeld, A. Chen, C.C. Ho, J.W. Evans (2010). “Dispenser Printing for Prototyping Microscale Devices” Transactions of NAMRI/SME, Volume 38, pp. 555-561.
  36. K. Reilly and P. K. Wright, “Modeling, fabrication and stress compensation of an epitaxial thin film piezoelectric microscale energy scavenging device,” 2009, Journal of Micromechanics and Microengineering, Volume 19, page 095014 to 095024.
  37. S. Leland, P. K. Wright and R. M. White, “A MEMS AC current sensor for residential and commercial electricity end-use monitoring,” 2009, Journal of Micromechanics and Microengineering, Volume 19, page 094018 to 094023.
  38. C. Ho, K. Murata, D. A. Steingart, J. W. Evans and P. K. Wright, “A super ink jet printed zinc-silver 3D microbattery,” 2009, Journal of Micromechanics and Microengineering, Volume 19, page 094013 to 09417.
  39. S. Leland, R.M. White and P.K.Wright, “Design and Fabrication of a MEMS AC Electric Current Sensor,” Advances in Science and Technology (Smart Materials and Micro/Nanosystems), Volume 54, 2008, pp.350-355.
  40. C. Ho, D. A. Steingart, J. W. Evans, and P. K. Wright, “Tailoring Electrochemical Capacitor Energy Storage Using Direct Write Dispenser Printing,” Electrochemical Society Conference, ECS Transactions 16 (1), 2008, pp 35-47.
  41. Q. Huang, P.K.Wright and S.T. Newman, “Wireless Manufacturing: a literature review, recent developments and case studies,” International Journal of Computer Integrated Manufacturing, Volume 22, Number 7, pp. 579-594.
  42. Dornfeld, P.K.Wright, A.Vijayaraghavan, and M. Helu “Enabling Manufacturing Research through Interoperability,” Transactions of the North American Manufacturing Research Institution (NAMRI), Volume 37, pp. 443-450
  43. Sundararajan and P.K. Wright, “Application of Software Engineering to Manufacturing Process Planning,” 2008, Journal of Computing and information Science in Engineering, Volume 8, no. 3, page 034001-1 to 034001-6
  44. Wilson, and P.K. Wright, “Head-mounted display efficacy study to aid first responder indoor navigation,” Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, Volume 223, 2009, pp. 675-688.
  45. Steingart, S. Roundy, P.K. Wright, and J.W. Evans, “Micropower Materials Development for Wireless Sensor Networks”, MRS Bulletin, April 2008, Volume 33, No. 4, pp.408-409.
  46. Wilson, and P.K. Wright, “Design of Monocular Head-mounted Displays, with a Case Study on Fire-fighting”, Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, Volume 221, Number 12, 2007, pp. 1729-1743.
  47. K. Wright N. Ota, and D. Dornfeld, “Condition Monitoring in End-Milling Using Wireless Sensor Networks (WSNs)”, Transactions of the North American Manufacturing Research Institution (NAMRI), Volume 36, 2008, pp. 177-183
  48. Otis, S. Gambini, R. Shah, D. Steingart, E. Quevy, J. Rabaey, A. Sangiovanni-Vincentelli, and P. Wright, “Modeling and Simulation Techniques for Highly Integrated, Low Power Wireless Sensor Networks”, IEEE Journal of Computers and Digital Techniques, Volume 1, Number 5, 2007, pp. 528-536.
  49. D. Mitcheson, E.K. Reilly, T. Toh, P.K.Wright and E. Yeatman, “Performance limits of three MEMS inertial energy generator transduction types,” Journal of Micromechanics and Microengineering (Institute of Physics), Volume 17, (2007), pp. S211-S216. (Later in the year this was re-reported in the highlights of the Journal of Micromechanics and Microengineering. According to the note from the Journal’s editors these are a showcase of the top contributions published in 2007 based on number of citations.)
  50. Delgado, A. Molina, I. Mezgar, and P.K. Wright, “Wireless Technology and its Application to Next Generation of Manufacturing Systems”, EngineerIT, November-December 2007, pp.28-31. (This paper was originally published in the 16th IFAC World Congress, Edited by P. Horacek, M. Simandl, P. Zitek, Prague, Czech Republic, July 4-8, 2005).
  51. H.C. Childs, K. Sekiya, R. Tezuka, Y. Yamane, D. Dornfeld, D-E. Lee, S. Min, and P.K. Wright, “Surface Finishes from Turning and Facing with Round Nosed Tools,” CIRP Annals, 57, 1, 2008, pp. 89-92.
  52. Sundararajan and P.K Wright, “Applications of Software Engineering to Manufacturing Process Planning,” Process Planning and Scheduling for Distributed Manufacturing,” Chapter 4, ISBN 1-84628-751-0 Springer-Verlag, 2007, pages 91-109.
  53. A. Dornfeld and P.K. Wright, “Technology Wedges for Implementing Green Manufacturing,” Transactions of the North American Manufacturing Research Institution, May 2007, Volume 35, pp. 193-200
  54. Sun and P.K. Wright, “Simulation-Based Cutting Parameter Selection for Ball End Milling,” Journal of Manufacturing Systems, Volume 24, Number 4, 2006, pp. 352-365.
  55. S. Leland and P.K.Wright, “Resonance Tuning of Piezoelectric Vibration Energy Scavenging Generators using Compressive Axial Preload,” Smart Materials and Structures, Institute of Physics Publishing, Volume 15, 2006, pp. 1413-1420
  56. H. Schneider, J.W. Evans, P.K.Wright and D. Ziegler, “Designing a thermoelectrically powered wireless sensor network for monitoring aluminum smelters,” Proceedings of the Institute of Mechanical Engineers, Part E: Process Mechanical Engineering, Volume 220, Number 3, 2006, JPME67, pp. 181-190
  57. Ota and P.K.Wright, “Trends in Wireless Sensor Networks for Manufacturing,” International Journal of Manufacturing Research, Volume 1, Number 1, 2006, pp. 3-17.
  58. Roundy, V. Sundararajan, J. Baker, E. Carleton, E. Reilly, B. Otis, J. Rabaey and P.K. Wright, “Energy Scavenging in Support of Ambient Intelligence: Techniques, Challenges and Future Directions,” in AmIware Hardware Technology Drivers of Ambient Intelligence, Edited by S Mukherjee, E. Aarts, R. Roovers, F. Widdershoven and M. Ouwerkerk, Published by Springer Press Dordrecht, Netherlands, ISBN-10 1-4020-4197-7, 2006 pp. 265-284.
  59. Steingart, C. Ho, A. Redfern, J. Evans, P. Wright, “A Wireless Low Cost Nanoamp Resolution Galvanostat,” Transactions of the Electro Chemical Society, Volume 1, Number 21, 2006, pp.17-22.
  60. H-J. Kim, D-M. Chun, S-H. Ahn, D-S. Kim, C-S. Jun, P.K. Wright, “Web-Based Design and Manufacturing System for Micro Machining,” Transactions of the North American Manufacturing Research Institution, 2006, Volume 34, pp. 349-355.
  61. K. Wright, D.A. Dornfeld, R. Hillaire, and N. Ota, “A Wireless Sensor for Tool Temperature Measurement and its Integration within a Manufacturing System.” Transactions of the North American Manufacturing Research Institution, 2006, Volume 34, pp. 63-70.
  62. Montero, N. Vargas, P. Wright, and J. Shah, “CrossTalk: A Collaborative Framework for Electro-Mechanical Product Design,” in Advances in Design, Edited by H.A. ElMaraghy, Published by Springer Verlag, ISBN 1-84628-004-4, 2006, pp. 229-242.
  63. Zavaliche, H. Zheng, L. Mohaddes-Ardabili, S.Y. Yang, Q. Zhan, P. Shafer, E. Reilly, R. Chopdekar, Y. Jia, P.K. Wright, D.G. Schlom, Y. Suzuki, and R. Ramesh, “Electric Field-Induced Magnetization Switching in Epitaxial Columnar Nanostructures,” Nano Letters, Volume 5, Number 9, 2005, pp. 1793-1796.
  64. Molina, J. Aca, and P.K. Wright, “Global Collaborative Engineering Environment for Integrated Product Development,” International Journal of Computer Integrated Manufacturing, Volume 18, Number 8, December 2005, pp.635-651.
  65. Hillaire and P.K. Wright, “A Process Monitoring System for Process-Based Product Validation,” Journal of Manufacturing Processes, Volume 7, Number 1, 2005, pp. 69-74.
  66. Corney, C. Hayes, V. Sundararajan, and P.K. Wright, “The CAD/CAM Interface” American Society of Mechanical Engineers, Journal of Computing and Information Science in Engineering, Volume 5, Number 3, 2005, pp. 188-197.
  67. K. Wright, “Rapid Prototyping in Consumer Product Design,” Communications of The Association for Computing Machinery (ACM), June 2005, Volume 48, Number 6, pp. 36-41.
  68. E. Merchant, D.A. Dornfeld and P.K. Wright, “Manufacturing: It’s Evolution and Future,” Transactions of the North American Manufacturing Research Institution, May 2005, Volume 33, pp. 211-218.
  69. Roundy, E. Leland, J. Baker, E. Carleton, E. Reilly, E. Lai, B. Otis, J. Rabaey, V. Sundararajan and P.K. Wright “Improving Power Output for Vibration-Based Energy Scavengers” IEEE Pervasive Computing Journal on Mobile and Ubiquitous Computing, Volume 4, Number 1, January – March 2005, pp. 28-36.
  70. Roundy, M. Strasser and P. K. Wright, “Powering Ambient Intelligent Networks” in “Ambient Intelligence” Edited by W. Weber, J.M. Rabaey, and E. Aarts and published by Springer November 2004, paper on pages 271-300.
  71. Roundy, and P.K. Wright, “A Piezoelectric Vibration based Generator for Wireless Electronics,” Smart Materials and Structures, Volume 13, 2004, pp. 1131-1142.
  72. Roundy, D. Steingart, L. Frechette, P.K. Wright and J. Rabaey, “Power Sources for Wireless Sensor Networks,” Lecture Notes in Computer Science, Springer-Verlag, GmbH, ISSN: 0302-9743, Volume 2920, 2004, pp. 1 – 17.
  73. Kumesaran and P.K. Wright, “Implementation of Draft Angle, Mold Machining Capabilities in an Automated CAD/CAM Pipeline.” International Journal of Computer Integrated Manufacturing, Volume 18, Number 1, 2005, pp. 1-14.
  74. Misra, V. Sundararajan, and P.K. Wright, “Zigzag Tool Path Generation for Sculptured Surface Machining”, American Mathematical Society, Series in Discrete Mathematics and Theoretical Computer Science, DIMACS Series, Volume 67, 2005, pp. 265-280.
  75. Sundararajan and P.K.Wright, “Volumetric Feature Recognition for Machining components with Freeform Surfaces”, 2004, Computer Aided Design, Volume 36, pp 11-25.
  76. Castelino, V. Sundararajan, R. D’Souza, B. Kannan, and P. Wright, “AMPS-An Automated Modular Process Planning System” American Society of Mechanical Engineers, Journal of Computing and Information Science in Engineering, Volume 4, Number 3, September 2004, pp. 235-241.
  77. K. Wright, D. A. Dornfeld, V. Sundararajan, and D. Misra. “Tool Path Generation for Finish Machining of Freeform Surfaces in the CyberCut Process Planning Pipeline”, Transactions of the North American Manufacturing Research Institution, May 2004, Volume 32, pp. 159-166.
  78. M. D’Souza, C. Sequin, and P.K. Wright, “Automated Tool Sequence Selection for 3-axis Machining of Freeform Pockets” Computer-Aided Design, Volume 36, 2004, pp. 595-605.
  79. Aca, R. Mejia, M. Velandia, E. Garcia, N. Galeano, H. Ahuett, A. Molina, and P.K. Wright, “Integrated Product Development in Virtual Enterprises Supported by Web-based Applications”, Process and Foundations for Virtual Organizations Edited by L.M. Camarinha-Matos and H. Afsarmanesh, Published by Kluwer Academic Press, 2003 pp. 361-368.
  80. Castelino, R. D’Souza and P. Wright, “Tool-path Optimization for Minimizing Airtime during Machining,” Journal of Manufacturing Systems, November 2003, Volume 22, Number 3, pp. 173-180.
  81. Rangarajan, D.A. Dornfeld, and P.K. Wright, “Probabilistic Precision Process Planning”, Transactions of the North American Manufacturing Research Institution, May 2003, Volume 31, pp. 539-546.
  82. S. Smith, P.K. Wright, and C. Sequin, “The Manufacturing Advisory Service: Web Based Process and Material Selection,” International Journal of Computer Integrated Manufacturing, June 2003, Volume 16, Number 6, pp. 373-381.
  83. Kannan and P. K. Wright, “Efficient Algorithms for Automated Process Planning of 2.5D Machined Parts Considering Fixturing Constraints” International Journal of Computer Integrated Manufacturing, 2004, Volume 17, Number 1, January-February, pp. 16-28.
  84. Roundy, P.K. Wright, and J. Rabaey, “A Study of Low Level Vibrations as a Power Source for Wireless Sensor Nodes”, Computer Communications, 2003, Volume 26 (11) (2003), pp. 1131-1144.

 

REFEREED NRC REPORTS

  1. Day, D.A., et al., National Research Council. 3 D Printing in Space, Washington, DC: The National Academies Press, 2014. (This is a multiple author NRC report, heavily reviewed prior to publication).
  2. Wessner, C.W. et al., National Research Council. 21st Century Manufacturing: The Role of the Manufacturing Extension Partnership Program. Washington, DC: The National Academies Press, 2013. (This is a multiple author NRC report, heavily reviewed prior to publication).

REFEREED CONFERENCE AND SYMPOSIUM PROCEEDINGS

  1. Pillatsch, N. Shashoua, A.S. Holmes, E.M., Yeatman, P.K. Wright, “Degradation of Piezoelectric Materials for Energy Harvesting Applications,” Journal of Physics Conference Series, Volume 557, pp. 1-5, 2014, http://conferenceseries.iop.org/conferenceseries/issue/1742-6596/557/1
  2. E. Gregg, P. Pillatsch, and P.K.Wright, “Passively Self-Tuning Piezoelectric Energy Harvesting Systems,” Journal of Physics Conference Series, Volume 557, pp. 1-5, 2014, http://conferenceseries.iop.org/conferenceseries/issue/1742-6596/557/1
  3. Cowell, R. Winslow, Q. Zhang, J. Ju, J. Evans, and P. Wright, “Composite carbon-based ionic liquid supercapacitor for high-current micro devices,” Journal of Physics Conference Series, Volume 557, pp. 1-5, 2014, http://conferenceseries.iop.org/conferenceseries/issue/1742-6596/557/1
  4. Magpantay, I. Paprotny, R. Send, Q. Xu, C. Sherman, L. Alarcon,J. Rabaey, R. White, and P. Wright, “Energy Monitoring in Smart Buildings using Wireless Sensor Networks,” The Third International Conference on Smart Systems, Devices and Technologies July 20 -24th Paris, France.
  5. D. Nguyen, I. Paprotny, P. Wright, and R. White, “In-plane capacitive MEMS flow sensor for low-cost metering of flow velocity in natural gas pipelines,” 27th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2014) – San Francisco, USA, Jan 25-30, 2014, pp. 971-974.
  6. Winslow, R., Wu, C. H., Wang, Z., Kim, B., Evans, J., & Wright, P. K., “Development and manufacture of printable next-generation gel polymer ionic liquid electrolyte for Zn/MnO2 batteries,” Phys.: Conf. Ser. 476, (PowerMEMS 2013 (Dec 3-6), London, UK), page 012085 – 012089.
  7. Pillatsch P, Miller L M, Halvorsen E, Wright P K, Yeatman E M, Holmes A S, 2013 Self-tuning behavior of a clamped-clamped beam with sliding proof mass for broadband energy harvesting Journal of Physics: Conference Series 476, (PowerMEMS 2013 (Dec 3-6), London, UK), 012068 – 012072.
  8. Jayme Keist, Christine Orme, Frances Ross, Dan Steingart, Paul Wright, and James Evans, “Coupling In-Situ Techniques to Analyze Zinc Deposition and Dissolution for Energy Storage Applications,” Materials Research Society Symposium Proceedings, 2013, Vol. 1491, DOI: 10.1557/opl.2012.1734
  9. Winslow, C.H. Wu, Z. Wang, B. Kim, J.W. Evans, and P.K. Wright, “Effect of Moisture Content in Ionic Liquid Gel Electrolyte for Printable Zinc/MnO2 Battery,” Electrical Energy Storage Applications and Technologies 2013, Oct 2013.
  10. Madan, Z. Wang, A. Chen, J.W. Evans, and P.K. Wright, “Dispenser Printed Thick Film Circular Thermoelectric Devices for Wireless Condition Monitoring Sensor Applications,” American Society of Composites, 2013, Sep 2013.
  11. Xu, Q.R., Send, R., Paprotny, I., White, R.M., Wright, P.K., “Miniature self-powered stick-on wireless sensor node for monitoring of overhead power lines,” Energy Conversion Congress, (ECCE), 2013 IEEE, 2013, pp. 2672-2675.
  12. Send, R., Q. Xu, W. Ku, I. Paprotny, R.M. White, P.K. Wright. Granular Radio EnErgy-sensing Node (GREEN): A 0.63cm3 wireless stick-on node for non-intrusive energy monitoring, Annual IEEE Conference on Sensors (IEEE SENSORS 2013), Baltimore, MD. (On CD).
  13. Paprotny I., M. Seidel, T.C. Nora, C. Morris, R. M. White, and P.K. Wright, “Deployment Methods for Magnetic Integrity Testing of Concentric Neutral Wires in Energized Underground Power Distribution Cables,” Proceedings of 2012 IEEE International Symposium on Electrical Insulation (ISEI 2012), June 10-3, 2012.
  14. Andrey Somov, Christine C. Ho, Roberto Passerone, James W. Evans, and Paul K. Wright, “Printing Electrochemical Capacitors for Energy Scavenging Sensor Networks,” 2012 Ninth International Conference on Networked Sensing Systems (INSS), Antwerp, Belgium, June 11-14, 2012, pp.1-6.
  15. Waterbury, A.C., Lin, S.D., and Wright, P.K. (2012) “Vibration energy harvesting from the unsprung suspension of a vehicle for asset monitoring using an electromagnetic transducer” In the Proceedings of PowerMEMS 2012, Atlanta, Georgia, USA, Dec. 2-5, 2012. pp 512-515.
  16. Paprotny, I., A. Waterbury, V.R. Challa, Q. Xu, D.P. Arnold, S. Sanders, and P.K. Wright, “Piezoelectrodynamic Gyrator: Analysis, Experiments, and Applications to Wireless Power Transfer,” Proceedings of PowerMEMS 2012, Atlanta, Georgia, USA, December 2-5, 2012.
  17. Paprotny, I., S. Sanders, and P.K. Wright, “Broadband Energy Scavenging from Vibrations using an Eccentric Rotor Electromagnetic Generator,” Proceedings of POWERMEMS 2012, December 2-5, 2012.
  18. Paprotny, I., C.G. Levey, P.K. Wright, and B.R. Donald, “Turning-rate Selective Control: A New Method for Independent Control of Stress-engineered MEMS Microrobots,” 2012 Robotics Science and Systems Conference (RSS 2012), July 9-13, Sydney, Australia.
  19. Wang, R. Winslow, B. Kim, J.W. Evans, and P.K. Wright, “Development of a Zinc-based Battery System for Grid-scale Energy Storage and Application of Flexographic Printing for the Fabrication,” 222nd Meeting of ECS, PRiME 2012 (Oct 7-12), Honolulu, Hawaii
  20. Wang, B. Kim, J.W. Evans, and P.K. Wright, “An Entirely Printed, Rechargeable Zinc-based Battery,” 222nd Meeting of ECS, PRiME 2012 (Oct 7-12), Honolulu, Hawaii
  21. Xu, M. Seidel, I. Paprotny, R. M. White and P. K. Wright. “Integrated Centralized Electric Current Monitoring System Using Wirelessly Enabled Non-Intrusive AC Current Sensors”, IEEE Sensors Conference, Limerick, Ireland, 2011 (Best Paper Award, 3rd out of 890 submissions).
  22. Paprotny, I., E. Halvorsen, Q. Xu, W.W. Chan, R.M, White, and P.K.Wright, “Non-linear Behavior of Cantilever-based Piezoelectric Energy Scavengers under Large Excitations,” Proceedings of POWERMEMS 2011, November 15- 18, 2011.
  23. Wang, D. Madan, A. Chen, R.C. Juang, M. Nill, J.W. Evans, and P.K. Wright, “Integration of Dispenser-Printed Ultralow Voltage Thermoelectric and Energy Storage Devices,” Proceedings of POWERMEMS 2011, November 15- 18, 2011.
  24. Giovanni Gonzalez, Igor Paprotny, Richard White, Paul K. Wright, “Novel Online RF technique for Detection of Water Trees in Underground Powered Distribution Cables,” Proceedings of IEEE 2011 Electrical Insulation Conference, 2011 (June), pp. 345 -348.
  25. Chen, D. Madan, B.T. Mahlstedt, P.K. Wright and J.W. Evans, “Dispenser-Printed Thick Film Thermoelectric Materials,” Proceedings of PowerMEMS Conference, 2010 (December), pp. 223-226.
  26. M. Miller, A. Chen, P.K. Wright, and J. Evans, “Resonance frequency modifications of MEMS vibration energy harvesters using dispenser printed proof mass,” Proceedings of PowerMEMS Conference, 2010 (December), pp. 411-141.
  27. Xu, I. Paprotny, R.M. White and P.K. Wright, “Energy submetering for circuit breaker panels using MEMS or mesoscale passive proximity current sensors,” Proceedings of PowerMEMS Conference, 2010 (December), pp. 127-130.
  28. Xu, White, R.M., Paprotny, I., and Wright, P.K., “Improved performance of non-linear piezoelectric AC energy scavengers,” Proceedings of PowerMEMS Conference, 2010 (December), pp. 53 -56.
  29. S. Leland, C.T. Sherman, P. Minor, R.M. White, and P.K Wright, “A New MEMS Sensor for AC Electric Current,” Proceedings of IEEE Sensors Conference, 2010 (November), pp. 1177–1182.
  30. Christine C Ho, Evans JW, Wright PK, “Direct Write Dispenser Printed Energy Storage Devices,” Micro- and Nanotechnology Sensors, Systems, and Applications II – Proceeding of SPIE, 2010 vol. 7679 pp. 76792A-1-9
  31. Xu, R.M. White, I. Paprotny and P.K. Wright, “Improved performance of nonlinear piezoelectric AC energy scavengers,” Proceedings of PowerMEMS Conference, 2010 (December), pp. 53-56.
  32. Paprotny, Q. Xu, W.W. Chan, R.M. White and P.K. Wright, “Piezoelectromagnetic Energy Scavenging from Current-carrying conductors,” Proceedings of IEEE Transactions on Power Delivery, 2010,
  33. Paprotny, E. Leland, C. Sherman, R.M. White, and P.K. Wright, “Self-powered MEMS Sensor Module for Measuring Electrical Quantities in Residential, Commercial, Distributions and Transmission Power Systems,” Proceedings of IEEE Energy Conversion Congress and Exposition, 2010 (September), pp. 4159–4164.
  34. Ho CC, Evans JW, and Wright PK, “Direct Write Dispenser Printed Energy Storage Devices” The Jim Evans Honorary Symposium, TMS, Seattle, WA February 2010, pp. 317-324.
  35. Paprotny, E. S Leland, R. M. White, P. K. Wright, “Optimization of a die-sized (10x10x4 mm3) MEMS AC energy scavenger for residential and commercial electricity end-use monitoring,” Proceedings 2009 PowerMEMS Conference, Washington DC, USA, December 1-4, 2009, pp. 241-244.
  36. Chen, D. Madan, M. Koplow, P. K. Wright and J. W. Evans, “Dispenser printed thermoelectric energy generators,” Proceedings 2009 PowerMEMS Conference, Washington DC, USA, December 1-4, 2009, pp. 277-280.
  37. M. Miller, E. K. Reilly, R. Fain, and P.K. Wright, “Piezoelectric Vibration Energy Harvesting for Unattended Sensors,” Proceedings 2009 PowerMEMS Conference, Washington DC, USA, December 1-4, 2009, pp. 299-302.
  38. K. Reilly, L. M. Miller, R. Fain, and P.K. Wright, “A study of ambient vibrations for piezoelectric energy conversion,” Proceedings 2009 PowerMEMS Conference, Washington DC, USA, December 1-4, 2009, pp. 312-315.
  39. M. Fain, M.A. Hopcroft, and P.K. Wright, “Development of a microscale energy harvesting system for portable device recharging: A Laptop Case Model,” Proceedings 2009 PowerMEMS Conference, Washington DC, USA, December 1-4, 2009, pp. 423-426.
  40. S. Leland, C. T. Sherman, P. Minor, P. K. Wright, and R. M. White, “A self-powered MEMS sensor for AC electric current,” Proceedings 2009 PowerMEMS Conference, Washington DC, USA, December 1-4, 2009, pp. 53-56.
  41. C. Ho, J. W. Evans and P. K. Wright, “Direct Write Dispenser Printing of Zinc Microbatteries,” Proceedings of 2009 PowerMEMS Conference, Washington DC, USA, December 1-4, 2009, pp. 141-144.
  42. Chen, M. Koplow, D. Madan, P. K. Wright, J. W. Evans, “Dispenser printed microscale generators for powering wireless sensor networks,” Proceedings of the ASME 2009 International Mechanical Engineering Congress and Exposition, November 13-19, Lake Buena Vista, Florida, On CD, Paper Number IMECE2009-11636.
  43. Koplow, A. Redfern, J. Cheng, and P.K.Wright, “Design of a digital wireless energy meter for residential energy monitoring using wireless sensor networks,” Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition, IMECE2009, November 13-19, 2009, Lake Buena Vista, Florida, USA, Paper Number: IMECE2009-12893.
  44. T. Sherman, E. S. Leland, A. Pullin, R.M. White, P. K. Wright, “Proximity-based passive current sensors for real-time monitoring of power usage in low and mid-voltage applications,” Proceedings of the ASME 2009 International Mechanical Engineering Congress and Exposition, November 13-19, Lake Buena Vista, Florida, On CD, Paper Number IMECE2009-11674.
  45. Christine Ho, Michael Mark, Michael Koplow, Lindsay Miller, Alic Chen, Elizabeth Reilly, Jan Rabaey, Jim Evans, and Paul Wright, “ Technologies for an Autonomous Wireless Home Healthcare System,” IEEE Computer Society 2009 Body Sensor Networks, pp. 29-34
  46. Padraic Shafer, Lindsay M. Miller, Pu Yu, Nathan C. Emley, Peter Minor, Eli Leland, Daniel Steingart, Paul K. Wright, and R. Ramesh, “Vibrational Energy Scavenging: Ferroelastic Domain Configurations on Strained Benders,” MRS Symposium on Nanoscale Electromechanics and PFM, Paper LL6.4
  47. S. Leland, P. Minor, R.M. White and P.K.Wright, “A MEMS AC Current Sensor for Residential and Commercial Electricity End-use Monitoring,” Proceedings of the PowerMEMS 2008 and MicroEMS 2008 Conference, Sendai, Japan, November 9-12, 2008, pp. 497-500.
  48. C. Ho, K Murata, D. A. Steingart, J. W. Evans, and P. K. Wright, “A Super Ink-jet printed zinc-silver 3D microbattery,” Proceedings of PowerMEMS 2008 and MicroEMS 2008, November 2008, pp 93-96.
  49. Steingart, C. Ho, J. Salminen, J, Evans and P.K Wright, “Dispenser Direct Write Printing of Thick Film Lithium Polymer Ion Microbatteries,” Electrochemical Society Fall 2006 meeting, General Session on Lithium Batteries, Cancun, Mexico: Presentation only
  50. Wilson, D. Steingart, A. Redfern, and P.K.Wright, “Wireless Sensor Networks (WSNs) for Fire Fighting and First Response,” Demonstration and Booth at the Wired Magazine Nextfest 2006, Jacob Javits Convention Center, New York NY Held from September 30th to October 1st 2006.
  51. C. Waterbury, M. Koplow and P.K.Wright, “Electromagnetic microscale vibration harvester for powering wireless sensor nodes” Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition, November 2-6, 2008, Boston, Massachusetts, On CD, Paper Number IMECE2008-67676
  52. Ota, E. Arens, and P.K. Wright, “ Energy Efficient Residential Thermal Control with Wireless Sensor Networks: A Case Study for Air Conditioning in California” Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition, November 2-6, 2008, Boston, Massachusetts, On CD, Paper Number IMECE2008-67563
  53. M. Miller, N.C. Emley, P. Shafer, and P.K. Wright, ”Strain Enhancement within Cantilevered, Piezoelectric MEMS Vibrational Energy Scavenging Devices”, International Conference, Smart Materials, Structures and Systems on CD
  54. K. Reilly and P.K. Wright, “Energy Scavenging for Body Sensor Networks,” The Second International Conference on Body Sensor Networks (BodyNets2007), Florence, Italy, http://www.bodynets.org/images/tech_program.pdf., June 11-13th 2007. CD only: no page numbers.
  55. S. Leland, P.K. Wright, and R.M. White, “Design and Fabrication of a Piezoelectric MEMS AC Current Sensor”, CIMTEC 2008, 3rd International Conference, Smart Materials, Structures and Systems, June 11, 2008. On CD
  56. Koplow, A. Chen, D. Steingart, P.K. Wright, and J. W. Evans, “Thick Film Thermoelectric Energy Harvesting Systems for Biomedical Applications”, Proceedings of the 5th International Workshop on Wearable and Implantable Body Sensor Networks, in conjunction with the 5th International Summer School and Symposium on Medical Devices and Biosensors, The Chinese University of Hong Kong, HKSAR, China, June 1-3, 2008. On CD
  57. H. Chee, M. Koplow, M. Mark, N. Pletcher, M. Seeman, F. Burghardt, D. Steingart, J. Rabaey, P.K. Wright, and S. Sanders, “PicoCube: A 1cm³ Sensor Node Powered by Harvested Energy”, 45th Design Automation Conference and International Solid State Circuits Conference, 45th ACM/IEEE, 8-13 June 2008, pp.114 – 119
  58. Rabaey, F. Burghardt, D. Steingart, M. Seeman, and P.K. Wright, ”Energy Harvesting – A Systems Perspective”, The IEEE International Electron Devices Meeting, 2007, Washington, D.C. December 10-12, 2007, pp. 363-366
  59. Steingart, J.W. Evans, A. Redfern, P.K. Wright, N. Dando, W. Xu, M. Gershenzon, and H.V. Meyden, “Wireless Measurement of Duct Temperatures on Aluminum Smelting Pots: Correlation to Roofline HF Concentration”, The Minerals, Metals and Materials Society, Light Metals Conference, 2008, pp. 221-225.
  60. Steingart. J.W. Evans, P.K. Wright, and D. Ziegler, “Experiments on Wireless Measurement of Anode Currents in Hall Cells”, The Minerals, Metals and Materials Society, Light Metals Conference, 2008, pp. 333-338.
  61. S. Leland, P.K. Wright, and R.M. White, “Design of a MEMS Passive, Proximity-based AC Electric Current Sensor for Residential and Commercial Loads”, PowerMEMS, 2007, The Seventh International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, November 28-29, Freiburg, Germany, pp.77-80.
  62. K. Reilly, and P.K. Wright, “Integration of Thin Film Piezoelectrics on Silicon for Application in Vibrational Energy Scavenging”, PowerMEMS, 2007, The Seventh International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, November 28-29, Freiburg, Germany, pp. 73-76.
  63. Watts, M. Koplow, A. Redfern, and P.K. Wright, “Application of Multizone HVAC Control Using Wireless Sensor Networks and Actuating Vent Registers”, Proceedings of the 2007 International Conference for Enhanced Building Operations, October 31-November 2, 2007, Hyatt at Fisherman’s Wharf, San Francisco, California, on CD
  64. Wilson, V. Bhargava, A. Redfern, and P.K. Wright, “A Wireless Sensor Network and Incident Command Interface for Urban Firefighting”, The 4th Annual International Conference on Mobile and Ubiquitous Systems: Computing, Networking, and Services, August 6-10, 2007, Philadelphia, Pennsylvania, USA.
  65. Steingart, C. Ho, J. Salminen, J. Evans, and P. Wright, “Dispenser Printing of Solid Polymer Ionic Liquid Electrolytes for Lithium Ion Cells” 6th International IEEE Conference on Polymers and Adhesives in Microelectronics and Photonics (Polytronic 2007), Oadaiba, Tokyo, Japan, 2007, pp. 261-264.
  66. Chris R. Baker, Kenneth Armijo, Simon Belka, Merwan Benhabib, Vikas Bhargava, Nathan Burkhart, Artin Der Minassians, Gunes Dervisoglu, Lilia Gutnik, M. Brent Haick, Christine Ho, Mike Koplow, Jennifer Mangold, Stefanie Robinson, Matt Rosa, Miclas Schwartz, Christo Sims, Hanns Stoffregen, Andrew Waterbury, Eli S. Leland, Trevor Pering, and Paul K. Wright, “Wireless Sensor Networks for Home Health Care,” In Smart Homes and Tele-Health Workshop (SmarTel) in conjunction with AINA-07: The IEEE 21st International Conference on Advanced Information Networking and Applications. IEEE ISBN 0-7695-2847-3, Niagara Falls, Ontario, Canada, May, 2007. pp.832-837
  67. K. Reilly, L. M. Miller and P.K. Wright, “Optimizing On-Chip Piezoelectric Energy Scavenging for Integration of Medical Sensors with Low-Power Wireless Networks,” The Body Sensor Network Conference, Aachen, Germany, March 26-28th 2007, pp. 111-115
  68. Redfern, E. Markiewicz, J. Baker, and P.K. Wright, “Wireless Sensor Networks (WSNs) for Machine Tool Monitoring,” International Conference on Smart Machining Systems, held at the National Institute of Standards (NIST), Gaithersburg, Maryland, March 13-15th 2007 On CD only no page numbers
  69. Steingart, C. C. Ho, J. Salminen, J.W. Evans, and P.K. Wright, “Dispenser Printing of Solid Polymer-Ionic Liquid Electrolytes for Lithium Ion Cells,” IEEE Polytronics 2007 Conference. 2007, pp. 261- 264
  70. Redfern, M. Koplow, and P. Wright, “Design architecture for multi-zone HVAC control systems from existing single-zone systems using wireless sensor networks,” Smart Structures, Devices and Systems III, edited by Said F. Al-Sarawi, Proceedings of SPIE (the International Society for Optical Engineering), Volume 6414, 2006, Paper 64140Y, pp.1-8.
  71. D. Mitcheson, E. K. Reilly, T. Toh, P. K. Wright and E. M. Yeatman, “Performance Limits of the Three MEMS Inertial Energy Generator Transduction Types, The Sixth International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications: PowerMEMS 2006, November 29th to December 1st 2006, Berkeley, CA., pp. 275-278
  72. K. Reilly and P. K. Wright, “Thin Film Piezoelectric Energy Scavenging Systems for an On-Chip Power Supply,” The Sixth International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications: PowerMEMS 2006, November 29th to December 1st 2006, Berkeley, CA., pp.161-164
  73. C. Ho, D.A. Steingart, J.P. Salminen, W.H. Sin, T.M.K. Rantala, J.W. Evans, and P.K. Wright, “Dispenser Printed Electrochemical Capacitors for Power Management of Millimeter Scale Lithium Ion Polymer Microbatteries for Wireless Sensors,” The Sixth International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications: PowerMEMS 2006, November 29th to December 1st 2006, Berkeley, CA., pp. 219-222
  74. S. Leland, R.M. White, and P.K. Wright, “Energy Scavenging Power Sources for Household Electrical Monitoring,” The Sixth International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications: PowerMEMS 2006, November 29th to December 1st 2006, Berkeley, CA., pp.165-168.
  75. Reilly, E. Carleton and P.K. Wright, “Thin Film Piezoelectric Energy Scavenging Systems for Long Term Medical Monitoring,” The Third International Workshop on Body Sensor Networks.” IEEE Conference at MIT Cambridge MA., 0-7695-2547, April 2006, pp. 38-41.
  76. Schneider, D. Steingart, J. Evans, P. Wright, and D. Ziegler, “Further Results from the Wireless Instrumentation of Hall-Heroult Cells” Light Metals 2006 TMS (The Minerals, Metals and Materials Society), pp. 331-334
  77. Ota and P.K. Wright, “Experiences with Wireless Sensor Network Performance in Residential Environments”, ACM RealWSN ’06 Workshop on Real-World Wireless Sensor Networks, Uppsala, Sweden, June 19th 2006, ACM 1-58113-000-0/00/0004.
  78. Ota, S. Ahrens, A Redfern, P.K. Wright and X. Yang, “Disaggregating the Residential Thermostat into a Multi-Agent system using Wireless Sensor Networks” Appeared in: International Conference on Mobile Adhoc and Sensor Systems (MASS), 2006 IEEE, Vancouver, BC, ISBN: 1-4244-0507-6, Oct. 2006, pp. 639-644.
  79. M. Lai, A. Redfern, and P.K. Wright, “Vibration Powered Battery-Assisted Passive RFID Tag” EUC Workshops 2005, LNCS 3823, IFIP International Federation for Information Processing, December 6-9, 2005, Nagasaki, Japan, pp. 1058-1068
  80. Sundararajan, D. Antonetti, P.K. Wright, S. Gudal, S. Athavale, Y. Pan, S-Y. Liou, “Design System for Composite Transmission Error Prediction for Automatic Transmissions,” Proceedings of the American Society of Mechanical Engineers 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 24-28, 2005, Long Beach, California, USA. Paper Reference Number DETC2005-85497 – Proceedings are on compact disc, precluding a page reference
  81. Sundararajan, A. Redfern, M. Schneider, P.K. Wright and J. Evans, “Wireless Sensor Networks for Manufacturing Systems” American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, November 5th -111th Orlando, Florida, 2005, Paper Reference Number IMECE 2005-82224, Proceedings are on Compact Disc, precluding a page reference.
  82. Baker, S. Roundy and P.K. Wright, “Alternative Geometries for Increasing Power Density in Vibration Energy Scavenging for Wireless Sensor Networks,” The Third International Energy Conversion Engineering Conference, American Institute of Aeronautics and Astronautics, San Francisco, California, 15th – 18th August 2005, Paper Number AIAA 2005-5617
  83. Montero, T. Pering, U. Udaud, P.K. Wright, and R. Want, “Experimental Study on the Effects of Human and Electronic-Mechanical Interaction on RF Signal Strength for a Personal Server,” Proceedings of the 2005 American Society of Mechanical Engineers Pacific Rim Technical Conference and Exhibition on the Integration and Packaging of MEMS, NEMS and Electronic Systems, July 17-22, 2005, San Francisco, California Paper Reference Number IPACK2005-73154 – Proceedings are on compact disc, precluding a page reference.
  84. H. Schneider, J. W. Evans, P. Wright, D. Ziegler and D. Steingart, “Experiments on Wireless Instrumentation of Hall Cells”, Light Metals 2005 TMS (The Minerals, Metals and Materials Society), 2005 pp. 407-412.
  85. Wilson, D. Steingart, R. Romero, J. Reynolds, E. Mellers, A. Redfern, L. Lim, W. Watts, C. Patton, J. Baker, and P. Wright, “Design of Monocular Head-Mounted Displays for Increased Indoor Firefighting Safety and Efficiency,” Helmet- and Head-Mounted Displays X: Technologies and Applications, part of the SPIE (International Society for Optical Engineering) Defense and Security Symposium 28th March – 1st April 2005, Orlando, Florida USA, SPIE Volume 5800, pp. 103- 114.
  86. Steingart, J. Wilson, A. Redfern, P.K. Wright, R. Romero, and L. Lim, “Augmented Cognition for Fire Emergency Response: An Iterative User Study” Augmented Cognition, Proceeding of the 11th International Conference on Human-Computer Interaction (HCI), Las Vegas, NV, July 22-27, 2005.
  87. Kate Hammond, Elaine Lai, Eli Leland, Sue Mellers, Dan Steingart, Eric Carleton, Beth Reilly, Jessy Baker, Brian Otis, Jan Rabaey, David Culler, and Paul Wright. “An integrated node for energy-scavenging, sensing, and data-transmission: applications in medical diagnostics.” The Second International Workshop on Body Sensor Networks.” Imperial College London April 11-13th 2005.
  88. Gudal, Y. Pan, S. Y. Liou, V. Sundararajan, D. Antonetti, and P.K. Wright, “Design System For Composite Transmission Error Prediction for Automatic Transmissions” 2004, American Society of Mechanical Engineers, Design Engineering Technical Conference (DETC),and Information in Engineering Conference, October 2004, Salt Lake City, Utah, USA. Paper Number DETC2004-57721. Proceedings are on Compact Disc, precluding a page reference.
  89. Sundararajan, A. Redfern, W. Watts and P.K.Wright, “Distributed Monitoring of Steady State System Performance Using Wireless Sensor Networks” American Society of Mechancial Engineers International Mechanical Engineering Congress, November 13-19, 2004, Anaheim, California, Paper IMECE2004-59884. Proceedings are on Compact Disc, precluding a page reference.
  90. S. Leland, E. M. Lai and P.K Wright, “A Self-Powered Wireless Sensor for Indoor Environmental Monitoring” 2004 Wireless Networking Symposium
    October 20 – 22, 2004 The University of Texas at Austin Department of Electrical & Computer Engineering Wireless Networking & Communications Group. Proceedings are on Compact Disc, precluding a page reference.
  91. K. Reilly, E. Carleton, and P.K. Wright, “Vibrational Energy Scavenging via Thin Film Piezoelectric Ceramics”, March 17th 2004, TMS Conference, p.354
  92. Odell, R, Davis, A. Smith and P.K. Wright, “Tool-glasses, Marking Menus, and Hotkeys: A Comparison of One and Two-Handed Command Selection Techniques” Graphics Interface Conference, ACM International Conference Proceeding Series; Vol. 62 Proceedings of the 2004 Conference on Graphics Interface London, Ontario, Canada, May 17-29, 2004 London, Ontario, pp. 17-24.
  93. Steingart, C. Ho, J.W. Evans, and P.K. Wright, “Design of an On-Chip Secondary Lithium Ion Polymer Microbattery for Millimeter-Scale Wireless Nodes,” Advanced Materials for Energy Conversion: The Minerals and Materials Society Meeting Fall 2004, pp. 339-343.
  94. Roundy, S., Steingart, D., Frechette, L., Wright, P. K., Rabaey, J., “Power Sources for Wireless Sensor Networks,” 2004, The 1st European Workshop on Wireless Sensor Networks (EWSN), Berlin, Jan. 19-21. http://www.ewsn.org/
  95. Roundy, B. Otis, Y-H. Chee, J.M. Rabaey, and P.K. Wright, 2003. “A 1.9GHz RF Transmit Beacon using Environmentally Scavenged Energy,” ISPLED 2003, Seoul Korea, August 25 – 27, 2003. Winner of a Best Paper Award.
  96. M. D’Souza, C.H. Sequin and P.K. Wright, “Set-up Level Tool Sequence Selection for 2.5D Pocket Machining,” American Society of Mechanical Engineers, Design Engineering Technical Conference (DETC) on Computers and Information in Engineering, September 2-6, 2003, Chicago, Illinois. Paper Number DETC2003/CIE-2. Proceedings are on Compact Disc, precluding a page reference.
  97. K. Lee, M. G. Montero, and P.K. Wright, “Design Methodology for the Thermal Packaging of Hybrid Electronic-Mechanical Products A Case Study on the Berkeley Emulation Engine (BEE),” American Society of Mechanical Engineers, Design Engineering Technical Conference (DETC) on Design Automation, September 2-6, 2003, Chicago, Illinois. Paper Number DETC2003/DAC-48790. Proceedings are on Compact Disc, precluding a page reference.
  98. N. Eggert and P.K. Wright, “A Study of Structural Behavior in Osteoporotic Trabecular Bone: Comparison between Finite Element Analysis and Experiments with Fused Deposition Models, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, 2002, New Orleans, BioEngineering/Bone Mechanics Session BED-7B.
  99. Roundy, P.K. Wright, and K.S.J. Pister, “Micro-Electrostatic Vibration-to-Electricity Converters”, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, 2002, 2002-34309, New Orleans, LA, November 17 – 22, 2002.
  100. L. Odell and P.K. Wright, “Concurrent Product Design: A Case Study on the Pico Radio Test Bed,” 2002 American Society of Mechanical Engineers, Design Engineering Technical Conference (DETC), Paper Number DETC2002/DFM-34154 – please note these Proceedings are now on Compact Disc, precluding a page reference
  101. D’Souza, P.K. Wright and C. Sequin, “Handling Tool Holder Collisions in Optimal Tool Sequence Selection for 2.5-D Pocket Machining” 2002, American Society of Mechanical Engineers, Design Engineering Technical Conference on Computer Integrated Engineering (DETC), Paper Number DETC2002/CIE-34475 Also the “Winner of the Computers and Information in Engineering Conference Best Paper Award” – please note these Proceedings are now on Compact Disc, precluding a page reference
  102. G. Montero, P. K. Wright and C. H. Sequin, “Managing Complexity in the Design of Electromechanical Products,” The Manufacturing Complexity Conference, Cambridge, England, April 9-10th, 2002.
  103. H. Ahn, J. Plancarte, and P.K. Wright, “The Impact of Reference Free Part Encapsulation (RFPE) on Design for Manufacturability with CNC Machining,” 2000 ASME IDETC, September 10-13, Baltimore, Maryland, 2000. – please note these Proceedings are now on Compact Disc, precluding a page reference
  104. Shah and P.K. Wright, “DFM Metrics” 2000 American Society of Mechanical Engineers, Design Engineering Technical Conference on Computer Integrated Engineering (DETC), September 10-13, Baltimore, Maryland, 2000. – please note these Proceedings are now on Compact Disc, precluding a page reference.
  105. Lee, S. H. Ahn, D. A. Dornfeld, and P. K. Wright, “The Effect of the Run-out on Design for Manufacturing in Micro Machining,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, New York, November 2001, – please note these Proceedings are now on Compact Disc, precluding a page reference.
  106. -C. Wang, J. Plancarte, V. Fabbrizio, P.K. Wright and A. Kramer “Industrial Design to Rapid Mold Making for Accelerated Time-to-Market of Consumer Electronic Products”, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Nashville TN., November 1999, pp. 863-867.
  107. H. Ahn, S. Roundy, P.K. Wright and S.Y.Liou, “Design Consultant: A Networked Based Concurrent Design Environment”, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Nashville TN., November 1999, pp. 563-569.
  108. A. Marchetti and P.K.Wright, “A PC-based Open Architecture Controller: Design Implementation and Operation”, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Nashville TN., November 1999, pp.107-113.
  109. Jae Ho Kim, F.-C. Wang, C. Sequin, and P.K.Wright, “Design for Machining Over Internet”, the Design Engineering Technical Conference (DETC) on Computer Integrated Engineering Paper Number DETC’99/DFM-8938. Las Vegas, Sept. 1999 Note: these Proceedings are on CD-ROM thereby precluding page numbers.
  110. Sun, F.-C. Wang, C. Sequin, and P.K. Wright, “Operation Decomposition for Freeform Surface Features”, the Design Engineering Technical Conference (DETC) on Computer Integrated Engineering Paper Number DETC’99/DFM-8964. Las Vegas, Sept. 1999 Note: these Proceedings are on CD-ROM thereby precluding page numbers.
  111. Inouye and P.K.Wright, “Design Rules and Technology Guides for Web-based Manufacturing” the Design Engineering Technical Conference (DETC) on Computer Integrated Engineering Paper Number DETC’99/CIE-9082. Las Vegas, Sept. 1999 Note: these Proceedings are on CD-ROM thereby precluding page numbers.
  112. Lee, D.A. Dornfeld and P.K. Wright, “Open Architecture Based Framework in Integrated Precision Machining System” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, MED-Vol.8, Anaheim CA., November 1998,
  113. -C. Wang and P.K. Wright “Concurrent Product Design and Manufacture: A Case Study on InfoPad, a Wireless networked Computer” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, MED-Vol.8, Anaheim CA., November 1998, pp. 3-10.
  114. Hillaire, L. Marchetti and P.K. Wright, “Geometry for Precision Manufacturing on an Open Architecture Machine Tool (MOSAIC-PC) Proceedings of the ASME International Mechanical Engineering Congress and Exposition, MED-Vol.8, Anaheim CA. November 1998, pp. 605-610.
  115. A. Stori and P.K.Wright “A Constant Engagement Offset for a 2.5 D Tool Path Generation” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, MED-Vol.8, Anaheim CA. November 1998, pp. 475-481.
  116. -C. Wang and P.K.Wright. “Internet-based Design and Manufacturing on an Open architecture Machining Center”, Proceedings of the Japan/USA Symposium on Flexible Automation, Tokyo, Japan, July 1998,
  117. -C. Wang and P.K.Wright “Web-based CAD Tools for a Networked Manufacturing Service” The 1998 ASME Design Engineering Technical Conference in Atlanta GA, September 1998, Paper Number DETC98/CIE-5517. Note: these Proceedings are on CD-ROM thereby precluding page numbers.